[专题讨论] 学不会五笔字型 请进来下，N64卡已经能更新固件了，给个教程

升级内核简要流程，没有翻译，大家凑和看吧
Here is how the user can update the firmware:
1. Purchase an "Altera USB Blaster" and a JTAG connector.
2. Install the "Altera Quartus II Web Edition" software.
3. Connect Altera USB Blaster and install driver from "C:\altera\10.0sp1\quartus\drivers\usb-blaster\".
4. Run Altera Quartus II Web Edition software.
5. Open "Tools -> Programmer".
6. Press "Hardware Setup" button and select "USB Blaster".
7. Press "Add File" button and select the firmware (*.pof) file.
8. Put bare board in N64console.
9. Connect JTAG to board and hold at angle to make a good connections.
10. Switch N64 power on.
11. Press "Start" in Quartus programmer tool.