引用:

原帖由 csnmbgq 于 2018-1-19 17:24 发表
posted by wap, platform: BlackBerry PRIV
看网上的教程，就是bios里没有csm......

bios的boot设置界面拍照传图

[ 本帖最后由 jjx01 于 2018-1-20 12:31 编辑 ]

引用:

原帖由 jjx01 于 2018-1-20 12:26 发表

bios的boot设置界面拍照传图

周一拍照上传
多谢大神想着我！

引用:

原帖由 csnmbgq 于 2018-1-20 12:37 发表


周一拍照上传
多谢大神想着我！

https://www.reddit.com/r/laptops ... on_alienware_17_r3/
After much forum searching and reading with no single post providing the complete solution, I wanted to consolidate what I learned here.

This laptop has no CDROM. You need to install via USB. - Use the Windows 7 USB DVD Download Tool https://www.microsoft.com/en-us/ ... b-dvd-download-tool

This will allow you to make a Win 7 bootable USB from a Win 7 .ISO

Turn off secure boot and enable legacy boot in the BIOS
Windows 7 has no support for USB 3.0 and USB3.0 cannot be disabled in BIOS on this laptop.

Slipstream in the USB 3.0 driver. The driver from the Alienware/Dell Web site did not work. You need the driver from Intel. It's name is: Intel(R)_USB_3.0_eXtensible_Host_Controller_Driver_4.0.4.51 You may want to remove the version numbers if you are using Google to find the current version. I got mine here: https://downloadcenter.intel.com ... C610-Chipset-Family

Need help with NTLite? This was the best guide I found: http://www.win-raid.com/t750f25- ... to-a-Win-image.html Dont forget you have to add all of these drivers to install.wim and boot.wim

Windows 7 did not support my 512 GB Boot drive or my 1TB Data Drive.

My drives are: 1TB - HGST H75721010 and 512GB - PM951 NVMe, Samsung, M.2 Form Factor

So again, you need to slipstream the drivers into the USB Win 7 install. The SATA driver was easy, just get it from the Alienware/Dell site using your service tag. This one works.

The M2. SSD is a little trickier. The driver from Samsung is an install .EXE that will not extract on another rig. I found an extracted driver here: https://mega.nz/#!pIVwgQJR!QflHg ... E0z09n81cDCG-PymgUh From this thread: https://www.reddit.com/r/techsup ... e_ssd_windows_7_64/ Or google for: samsung nvme driver uncompressed

That should allow you to boot your Win 7 x64 SP1 USB and install on the Alienware 17 R3. Good Luck!


如果boot设置界面是这样的话，第一项不要用uefi
第四项secure boot disable
第五项load legacy option rom enable

posted by wap, platform: iPhone
为了强推win10真是丧心病狂

引用:

原帖由 jjx01 于 2018-1-20 12:50 发表

https://www.reddit.com/r/laptops ... on_alienware_17_r3/
After much forum searching and reading with no single post providing the complete solution, I wan ...

第一项除了uefi，只有另外一项......

boot option下，只有ipv4和ipv6，没有windows boot manager~

周一我先按您给的这个方式试试