» 您尚未登录:请 登录 | 注册 | 标签 | 帮助 | 小黑屋 |


发新话题
打印

[老游杂谈] cps1系列至今未被精确模拟? !!!

我不相信callus比mame更精确。楼主根据表面现象判断是不正确的。。。


TOP

mame里按tab
附件: 您所在的用户组无法下载或查看附件



TOP

引用:
原帖由 坳由根 于 2012-6-27 12:39 发表

胡扯,你就没见过callus吧??

我在tg起码说过5次了,玩cps1游戏必须用callus~

所有机种,想要用模拟器玩,最后的一个选择才是mame~~多功能模拟器只给精确模拟要求低的用户准备的~~~
吓尿了。。。

我确实外行,不懂。但是一个98年老模拟器的精确度和mame比,不说cps1驱动,就是底层m68000和音乐芯片的模拟度上,都应该是mame完胜吧?

至于cps1驱动,也有这么多wip,你觉得callus和mame在一个水平线吗


0.31 [Paul Leaman]


Bugs:

- ffight, area88, cawing: 30 impulses / second autofire doesn't work with game design "flaws". Kale (ID 04012)


WIP:

- 0.145u5: CPS-1 update [Team CPS-1]: Fixed some labels in various sets to match real PCBs, added some documentation notes and confirmed PCB infos. Reordered sf2cejx sets.

- 0.145u4: CPS-1 update [Team CPS-1]: Added some notes and done some documentation fixes. Expanded and updated games table in video\cps1.c. Removed the notes about LW-13.10D ROM in forgottnu and RT_23.13B ROM in wonder3, since current dumps are confirmed as good. Fixed qad labels and confirmed PCB infos.

- 0.144u7: Aaron Giles fixed U.N. Squadron and other CPS1 games with OOB tiles and strange behavior while single frame stepping.

- 0.144u3: CPS-1 update [Team CPS-1]: Added LWCHR.3A, ST22B.1A, STF29.1A, TK22B.1A, VA24B.1A and YI24B.1A PALs. Minor cleanups and fixes.

- 0.144u2: CPS-1 update [Team CPS-1]: Minor cleanups and fixes.

- 0.144u1: CPS-1 update [Team CPS-1]: Added PCB infos to video\cps1.c. Added some documentation notes to various sets. Minor cleanups and fixes.

- 0.142u4: Joe Caporale gave labels to many inputs in CPS1 games.

- 0.141u2: CPS-1 update [Team CPS-1]: Added Tenchi wo Kurau (Japan Resale Ver.). Confirmed B-Board # for chikij, added ROMs positions, PALs and some PCB infos to video\cps1.c. Fixed sf2uk labels and added PCB infos. Identified and documented willowje as an early and genuine USA release, added a note and renamed willowje -> willowo. Verified and fixed XTALs of Japan Resale Versions to work at 12MHz, they all use DASH A-Boards. Minor cleanups and fixes.

- 0.140u2: CPS-1 updates [Team CPS-1]: Confirmed B-Board # for forgottnua, willowje, cawingu, fixed their labels where wrong and added pcb infos to video\cps1.c. Minor cleanups and fixes.

- 0.139u2: CPS-1 update [Team CPS-1]: Minor cleanups and fixes.

- 18th August 2010: Smitdogg - The box of Capcom goodies arrived today from Japan. They are Japanese versions of Knights of the Round, Willow, and King of Dragons. In Willow's case we got it to correct the current set using incorrect roms. But for the other 2, yet again, the program rom labels indicated new versions we don't have dumped and so far look to be matching currently dumped sets, or at least doing some mixmatching with program roms and different sizes on graphics roms. I'm not really sure yet to be honest, they aren't fully dumped yet. You'll see why when you see how many roms they use. I'll finish dumping them all tomorrow.

- 10th August 2010: Smitdogg - We won the Capcom games that I was raising money for a few days ago. They should arrive in about a week. There is other oldschool Capcom news on the way as well.

- 0.139u1: CPS-1 update [Team CPS-1]: Expanded and updated games table in video\cps1.c. Confirmed B-Board # for 3wondersu and varth. Fixed labels in ghouls, ghoulsu to match real PCBs. Removed 14.bin in dynwarj, it was a bad dump. Marked nm_23.12b in nemoj BAD_DUMP. Removed knightsj set (roms were split & hacked to work on a suicided board). Added roms relationship between parent/clones where missing. Fixed some incorrect notes added in previous update. Reordered some sets. Minor cleanups. Fixed sf2ceua labels and added PCB infos. Fixed sf2ceub labels and added PCB infos, removed 1 incorrect rom and replaced with proper redump done by Dumping Union. Fixed punisher and punisheru Q-Sound labels and added D-Board PALs. Brian Troha set correct B-Board mapper for "resale" kits. This fixes missing graphics in Area 88 (Japan Resale). Documentation update for some CPS1 sets (B-Board chip information) verified via Team Japump PCB photos [Brian Troha].

- 1st August 2010: Smitdogg - Team Japump are dumping/fixing some CPS1 revisions. I got our bids in for the other needed Capcom revisions.

- 0.139: CPS-1 update [Team CPS-1]: Added missing PALs as reference to most of remaining sets. Dumped and added TK24B1.1A to Dynasty Wars [Corrado Tomaselli]. Fixed LW-13.10D rom loading in Forgotten Worlds to match real PCB. Identified, verified and documented a ton of PCBs, adding/fixing missing/wrong infos as ROMs labels and positions, B-Board, C-Board and CPSB IDs and PALs [Stefan Lindberg, dlfrsilver, MKL]. Reordered all sets per release date in cps1.c and video\cps1.c. Updated games table in video\cps1.c and added some notes on PALs table. Minor cleanups.

- 0.136u1: Fabio Priuli fixed NVRAM for dino, punisher, wof and clones

- 0.135u4: Fabio Priuli added driver data struct and save states to CPS1 driver.

- 0.133u3: Corrado Tomaselli verified and added correct xtals values for CPS1 boards. Added correct xtal and divisor for OKI6295 taken from Forgotten Worlds schematics.

- 0.129u4: Nicola Salmoria fixed a contact MAMEDEV message in the CPS1 driver.

- 0.128u4: Updated CPS1 documentation [Nicola Salmoria].

- 0.127u1: Additional input port cleanups in the CPS1 driver [Fabio Priuli].

- 0.127: Nicola Salmoria updated CPS1 to use proper gfx ROMs (+ PALs) for Varth (Japan 920714), and to load correct A-Board PALs for QSound games.

- 0.126u5: Corrado Tomaselli and Charles MacDonald added reverse engineered PLD images to CPS1 games (A-board to all and B-board and C-board to many).

- 0.126u4: Corrado Tomaselli verified and corrected CPS1 refresh rate. Changed VSync to 59.610000 Hz.

- 0.125u6: Corrado Tomaselli changed all games after Street Fighter 2 CE to have a 12MHz clock. Verified on Mega Man and Quiz & Dragons (original kits with plastic case). I am resonably sure all the other games after ST2CE have the DASH CPS1 board with 12MHz clock.

- 0.125u3: David Haywood fixed duplicate input port bits in CPS1 driver.

- 0.124u5: Massive update to ROM naming in the CPS1 driver, also loading smaller EPROMs for Japanese sets instead of the larger mask ROMs where possible. Added information about B-Board revisions where possible. There is still work to do on this regard but this is a first step in untangling the mess [Nicola Salmoria]. Nicola Salmoria and Corrado Tomaselli verified more CPS1 gfx ROM mappings against PALs. Fixed rom names in all games.

- 0.124u4: Further CPS1 improvements [Nicola Salmoria, Corrado Tomaselli, Charles MacDonald]: Fixed layer enable at the end of stage 4 in Varth. Increased Varth CPU clock to 12MHz to reduce slowdowns (the game was released after sf2ce so the faster A-board was available). Verified more gfx rom mappings against PAL dumps (thanks to Corrado). Verified memory maps using A-board PAL dumps (thanks to Charles). Separated the address ranges for CPS-A and CPS-B customs. This finally clarifies why some registers are fixed and some change with every game. Identified three new unknown registers in the CPS-B-21 custom. Their purpose is unknown. All unhandled accesses to CPS-A/CPS-B registers will now be reported. There shouldn't be any left. Look out for "contact MAMEDEV" popups. Cleaned memory maps. Moved Forgotten Worlds special input memory handlers to DRIVER_INIT. Moved extra input handlers to video/cps1.c since the extra connectors are on the C-board. Added sound to Final Crash. Lowered SF2 clock speed to 10MHz. This is on the assumption that, since the 12MHz A-Board is called "89626A-4 DASH", it should have started to be used with SF2 DASH--that is, sf2ce.

- 0.124u3: Nicola Salmoria and Corrado Tomaselli fixed CPS1 palette control register to match tests on Magic Sword PCB. Nicola Salmoria verified several CPS1 graphics ROM mappings against PAL dumps. Nicola Salmoria merged CPS1, CPS2 memory maps and some tweaks from schematics, though to get perfect memory maps dumps of the A-board PALs would be needed.

- 0.124u2: Verified some GFX rom mapping tables against PAL dumps. Improved understanding and emulation of palette related registers [Nicola Salmoria, Corrado Tomaselli]. Nicola Salmoria removed CPS1 tile kludges and replaced with per-game ROM mapping tables. Ideally, the ROM mapping should be derived from mapping of the PALs found on the B board. Note that this is a significant change and some new bugs might be caused by it. Unlike previous bugs, where extra garbage tiles would appear in the games, the new bugs would be tiles or sprites MISSING--so they will be harder to notice. This would happen because in some cases the 16x16 regions of the gfx ROMs can be used by both scroll2 and sprites, while in other cases they must be separated.

- 0.124u1: Nicola Salmoria fixed CPS1 background color. This fixes 3 wonder (game start) and mtwins (explosion during attract). It seems to break Varth, however, and has dubious effects on the boot sscreens of avsp, sfa3 and possibly other CPS2 games. Changed palettesize to 3072 colors.

- 0.122u8: David Haywood fixed the CPS driver to at least display the correct clock in the driver info, by degrading the clock through alternate means.

- 0.121: Vas Crabb updated the DIP locations for all games in the CPS-1 driver.

- 0.114u2: Couriersud fixed crash if you attempt to view graphics page 4.

- 0.114: Aaron Giles fixed a MAME crash if you do a hardware reset.

- 0.112u3: MAME Italia forum connected brightness support on the CPS1 board (not just CPS2) after verifying that the real board does support it.

- 0.109: Input port cleanup and additional comments in the CPS1 driver [Stephane Humbert].

- 0.105u1: David Haywood updated CPS-1 driver to more accurately draw tilemaps, based on evidence from a board with mixed ROMs.

- 5th April 2006: David Haywood - A guy called Murray posted on the MAME.net and neo-geo.com forums about a problem he was having with his Final Fight PCB. The problem looked like it might be due to a mix of Japanese and US roms as the Japanese roms don't contain a full Winners Don't Use Drugs Logo. He got a friend to dump the socketed roms on the PCB and sure enough the socketed graphic roms matched the Japanese set in MAME. This set, being a newer US revision was then plugged into MAME (ffightua in .105) but there was something wrong. MAME displayed the Winners Don't Use Drugs screen perfectly with this mixed set of roms. At this point I wondered if maybe one or both of his Mask Roms were also from a Japanese revision so I loaded the US set with an entire set of Japanese GFX. The logo was broken, but not in the same way as the PCB. For a while this was rather confusing, it must be getting the Japanese characters from somewhere, but the only place they exist are in the Japanese roms, and it would appear the text layer graphics aren't used in them when running the US set. No matter what I tried to change in terms of the roms I couldn't reproduce the exact problem shown. Then I remembered, MAME had some code to force the 8x8 text layer characters to always be drawn from the Left Hand Side of each 16x16 tile (apparently for Carrier Air Wing...) but the left and right sides of almost every 16x16 character used for the 8x8 layer were identical. The screenshot made it quite obvious that the real hardware does not always draw the left hand side of the tile, but instead alternates from left side to right side for every column on the display. By implementing this behavior in MAME I was able to reproduce the same glitch shown on the real PCB when mixed roms are used. I suspect the problem with Carrier Air Wing which resulted in the left hand side always being used is another problem, the CPS video hardware is full of strange little hacks for the early CPS games anyway. The change will hopefully be in 105u1, I can't see anything broken by it, but some testing would be helpful.

- 0.101u1: Phil Bennett corrected CPS1 frequencies based on measurements from a real PCB. Changed Z80 CPU2 clock speed to 3579545 Hz and YM2151 to 3579545 Hz. And changed 68000 CPU1 clock speed to 12MHz and Z80 CPU2 to 8MHz in games with Q-Sound.

- 0.94u2: Aaron Giles fixed CPS1 QSound routing.

- 0.93u1: Aaron Giles fixed OKI frequency to 7576Hz in the CPS1 games and in the QSound games properly remove the YM2151.

- 0.93: Changed OKI6295 clock speed to 6061 Hz.

- 0.73: Fixed some dipswitches in all games.

- 0.70u2: Some CPS1 dipswitch / input fixes [El Condor].

- 13th December 2002: Stephane Humbert fixed the inputs in the CPS-1 driver.

- 0.57: Fixed missing 'MAGIC SWORD...OTHER COUNTRY' and 'INSERT COIN' text in Magic Sword and Varth.

- 0.53: Moved drivers\cps1.h to includes\.

- 7th May 2001: Chack'n cleaned up the CPS-1 driver romset definitions a little.

- 21st February 2001: Nicola Salmoria added buffering to the keyboard input code, allowing more than two keypresses at the same time. This fixes Zangief's spin in Street Fighter 2.

- 10th January 2001: Paul Leaman added the necessary modifications to the CPS-1 driver to allow CPS-2 emulation.

- 30th September 2000: Darren Olafson fixed a bug that prevented sf2accp2 from working.

- 0.37b6: Changed palettesize from 2048 to 4096 colors.

- 27th August 2000: Nicola Salmoria perfected the CPS-1 starfield graphics emulation (used in Forgotten World and Strider).

- 21st August 2000: Nicola Salmoria added preliminary starfield emulation to the CPS-1 driver.

- 10th August 2000: Nicola Salmoria fixed the protection bugs in Slam Masters.

- 0.37b5: Removed vidhrdw\cps1draw.c.

- 14th July 2000: Nicola Salmoria fixed some CPS-1 graphics problems.

- 10th July 2000: Nicola Salmoria fixed the protection problems in Slam Masters.

- 5th June 2000: Paul Leaman added Warriors of Fate to the CPS-1 driver.

- 28th December 1999: Paul Leaman removed another kludge from the CPS-1 video driver.

- 27th December 1999: Paul Leaman added protection work-around to Slam Masters and did some other CPS1 fixes.

- 19th November 1999: CAB fixed some sound related things in CPS-1 driver.

- 0.36b12: Changed Z80 CPU2 clock speed to 6MHz.

- 0.36b11: Changed sndhrdw\cpsq.c to sound\qsound.c/h.

- 0.36b8: Bryan McPhail fixed sprite lag in CPS1. Nicola Salmoria added vh_eof_callback to the MachineDriver structure. See cps1 for usage examples.

- 18th October 1999: Bryan McPhail sent in a general sprite lag fix, helping CPS-1 games at least.

- 0.36b1: Added vidhrdw\cps1draw.c. Paul Leaman fixed bad tiles in some CPS1 games.

- 8th July 1999: Paul Leaman sent another CPS1 video driver update with all the garbage hopefully gone.

- 0.35: Added sndhrdw\cpsq.c.

- 3rd July 1999: Paul Leaman fixed several CPS-1 graphics problems such as the missing van in Punisher and some others.

- 30th June 1999: Paul Leaman sent a new CPS-1 driver with stub functions for the Qsound system. It doesn't play anything yet, but simple sample playing shouldn't be far off.

- 0.35RC1: Brian Lewis and Andrea Mazzoleni added new tweaked VGA modes: 384x240 (for CPS1, Pang etc.), 384x256 (for Lode Runner etc.), 336x240 (for Gauntlet and other Atari games), 320x240 (for NeoGeo and others).

- 0.35b13: Removed machine\cps1.c.

- 0.35b4: Added machine\kabuki.c.

- 23rd February 1999: The CPS1 driver should now have mostly correct row scrollings and priorities.

- 0.35b3: CPS1 games are being worked on, they are temporarily slower but accuracy is improved.

- 13th February 1999: More progress on the CPS1 driver. Some of the later CPS1 games utilizing the Q-sound system are now working (such as Cadillacs & Dinosaurs, Punisher and Warriors of Fate), and a few minor bugs have been fixed. No sound though, because the Q-sound roms are encrypted.

- 0.35b2: Sound fade timer ports in the CPS1 games (see Willow's Test mode for an example) [Paul Leaman]. Improved row scrolling in Street Fighter 2, plus several other fixes to the CPS1 games [Paul Leaman].

- 0.33b7: The CPS1 games use the dynamic palette system [Aaron Giles].

- 0.33b2: Paul Leaman improved speed in the CPS1 games.

- 0.31: Added cps1.c/h driver, machine\cps1.c and vidhrdw\cps1.c.


TOP

引用:
原帖由 lovecf4444 于 2012-6-27 11:20 发表
请问云里翻,具体用哪一版 MAME可以实现升降MAIN CPU的功能,我在用MAME PLUS 145U5,这个版本的TAB菜单里面没有相关功能。
按tab以后,在参数调整里面,你的mame里面应该有的吧。

你说的老外讨论串在哪儿呢?我也去瞧瞧

TOP

引用:
原帖由 lovecf4444 于 2012-6-27 14:43 发表
http://www.mametesters.org/view.php?id=408
我用的是MAME PLUS 145 U5,算是比较新的版本了,按TAB是有参数调整的菜单,但是进去没有升降CPU的选项,估计你们用的是比较旧的MAME?

另外贴子里报告的sf2hf,是街霸 ...
你可能要打开cheat模式才能调整cpu频率。

TOP

发新话题
     
官方公众号及微博