PS3能降级了....3.5也能降级了....E3 Card Reader (十几刀)

PS3能降级了....3.5也能降级了....E3 Card Reader (十几刀)
没听说过这是啥东西...



   1. Welcome to PSGroove.com! If this is your first visit, you need to register before posting comments, starting a blog or participating in the forum. Cheers

    *
      E3-Downgrader - E3 Card Reader Now Able to Downgrade Consoles
      0diggsdigg         0                
      by
      grandy
          o View Profile
          o View Forum Posts
          o Private Message
          o View Blog Entries
          o View Articles
      Published on 12-03-2010 02:37 PM
      30 Comments Comments
      The E3 Card Reader team has informed us that they have successfully placed a 3.50 console into Factory Service Mode. What this means is 3.50 consoles can now be downgraded via E3 Card Reader. For those that currently own an E3 Card Reader, a simple update to the dongles flash is all that is needed to be able to downgrade your system.




      E3-Downgrader Site: http://e3diy.net/index.html

      E3-Downgrader Download: http://e3diy.net/Download/e3downgrade%2012.03.rar (PASSWORD = iLoveE3)

      E3-Downgrader Mirror1: http://www.multiupload.com/5Y6D7AJKR8

      Dear friends,
      Thank you for using E3card Reader PS3. Today we will bring you a big surprise: the E3-Downgrader for E3card Reader. Yes it's THE downgrader which can turn your 3.5 PS3 down to any version you wanted, i.e. the 3.41. It's no time limit, no PC software need to download, no need to write any emails, no need to wait and after all it's FREE. Yes, it's true. We can even proved that today it's not the day one of you need to go on board of some you know what ships, that of cause because we are Chinese. You can review the videos by click here, download the upgrade file by click here and download the 3.41 FW package by click here.
      Password : iLoveE3
      please note that it's case-sensitive.
      If you have any questions, please feel free to contact us.
      Best Regards
      E3Diy Group
      E-mail: e3diy.ok@gmail.com

      How to downgrade firmware 3.42/3.50 or above to firmware 3.41 with E3 Card Reader :

      1. Insert E3 Card Reader device that has been reprogrammed as downgrader into your console
      2. Turn on the console using the same boot method as all other jailbreaks: Press power then immediately press eject. Your console will turn on and E3 Card Reader will light up red LED followed by blue LED
      3. Turn off system via menu
      4. Remove E3 Card Reader dongle and turn on console to make sure you are in Factory Service Mode. You will see a huge red box on the screen saying Factory Service Mode.
      5. Load any blank FAT32 USB flash drive device with 2 files in the root directory:
      1. Modified 3.41 PUP
      2. Lv2Diag.self (File 1)
      6. These must be the only files on the USB key and must be placed in the main (root) directory.
      7. Insert flash drive into the last USB port to the right — the first USB port in from the right side if you’re facing the console. Turn the PS3 on and you will see black screen but the PS3 HDD light will flash.
      8. The process takes 3-4 minutes for the system to install the old firmware. Towards the end, the power button on the console will start flashing green and then your console will power off.
      9. Remove the flash drive and turn on the console, you will still be in Factory Service Mode. Please verify you have downgraded successfully to version 3.41 by going to "System Information".
      10. (Optional) – If you wish to downgrade to any older firmware you can follow step 4, 5, 6 using any regular firmware PUP. (You do not need to use modified custom firmware now that you are on 3.41).
      11. Insert USB flash drive back into your PC and delete the PUP and Lv2Diag.self file (File 1) and copy the other Lv2Diag.self (File 2) to the root of the flash drive.
      12. Insert USB flash drive back into the same USB port on the PS3 and power on your PS3. After 10 seconds it will power off.
      13. Remove USB flash drive and turn on your console again. You will be out of factory service mode and back in retail mode with your chosen firmware version installed. You will need to go through setting up settings configuration.
      You can purchase the E3 Card Reader below for $15.00. Enter coupon code TJOOS for $1.80 off.
      Categories:
         1. Downgrading
      Tags :
          o card reader
          o downgrade
          o factory service