posted by wap, platform: BlackBerry PRIV
很好，谢谢，喜欢
就是说， 3dsXL必须拆机硬破？

posted by wap, platform: BlackBerry PRIV

引用:

原帖由 @jun4rui  于 2016-8-30 23:04 发表
搞定了，真简单，我第一次刷3DS，一次性成功了，文档写的很详细了。

就是步骤太长太耗时，我8点多开始搞到11点了

请问您破的是哪种机？
new3DSXL？

posted by wap, platform: Firefox
那个教程怎么把这一步给省了??
....原来是作者防盗版不写字只贴大图, 结果其中一个大图显示不全.
An old unsupported NAND has been detected


看到黑屏吓了一大跳 以为变砖了.
所以看山寨版的还是不行, 必须得看原版的.


Section III - Configuring Luma3DS

    Hold select on boot to enter the Luma3DS menu
        Make sure to start holding the button before pressing power
        If you get a black screen, follow this troubleshooting guide
        If you boot to SafeA9LHInstaller, follow this troubleshooting guide
    Use the (A) button and the D-Pad to turn on the following:
        "Autoboot SysNAND"
        "Use SysNAND FIRM if booting with R (A9LH)"
        "Show current NAND in System Settings"
        "Show GBA boot screen in patched AGB_FIRM"
    If you are using a New 3DS, you should also enable the following:
        Toggle "New 3DS CPU" to "Clock+L2(x)" for improved game performance
    Press Start to save and reboot
        If it freezes, hold the power button until it shuts down, then continue with the instructions
    For now, booting to a black screen or the message "An old unsupported NAND has been detected" is normal (Luma3DS cannot boot a 2.1.0 NAND), just continue with the instructions

本帖最后由 himura 于 2016-9-2 11:25 通过手机版编辑