Board logo

标题: [S905]如何看自己的s905盒子是否支持libreelec,sx05re或者lakka? [打印本页]

作者: china_ktv    时间: 2017-10-20 10:17     标题: [S905]如何看自己的s905盒子是否支持libreelec,sx05re或者lakka?

posted by wap, platform: 红米Note3
众所周知,s905的盒子很多,怎么知道自己的s905盒子是不是能刷基于Linux系统的各种系统呢?方法很简单,如果你的盒子已经root,那就安装一个终端模拟器,如果还在运营商的服务期,没皮角,那就买个ttl线,用PC通过ttl线连接盒子,这样不会动到盒子的系统。
安卓下,用终端模拟器或者TTL线,输入
cat /proc/device-tree/amlogic-dt-id
即可看到当前板子的型号。
如果显示是gxl_p211或gxl_p215,则目前还不支持,不能用SX05RE或者LAKKA,其他型号找对应的DTB即可。
作者: 咖啡殉    时间: 2017-10-20 11:47

楼主知道这个怎么ROOT吗?

TTL进终端后,HELP出来的命令跟其他的都不一样,摔!

gxb_p201_v1#help
?       - alias for 'help'
aml_sysrecovery- Burning with amlogic format package from partition sysrecovery
amlmmc  - AMLMMC sub system
amlnf   - aml nand sub-system
amlnf_test- AMLPHYNAND sub-system
autoping- do auto ping test
autoscr - run script from memory
base    - print or set address offset
bmp     - manipulate BMP image data
booti   - boot arm64 Linux Image image from memory
bootm   - boot application image from memory
bootp   - boot image via network using BOOTP/TFTP protocol
cbusreg - cbus register read/write
clkmsr  - measure PLL clock
cmp     - memory compare
cp      - memory copy
crc32   - checksum calculation
cvbs    - CVBS sub-system
dcache  - enable or disable data cache
defenv_reserv- reserve some specified envs after defaulting env
dhcp    - boot image via network using DHCP/TFTP protocol
echo    - echo args to console
efuse   - efuse read/write data commands
efuse_user- efuse user space read write ops
emmc    - EMMC sub system
env     - environment handling commands
ethchk  - check ethernet status
ethdbg  - set ethernet debug level
ethmode - set ethernet mac mode
ethrst  - reset ethernet phy
exit    - exit script
false   - do nothing, unsuccessfully
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls   - list files in a directory (default /)
fatsize - determine a file's size
fdt     - flattened device tree utility commands
get_rebootmode- get reboot mode
go      - start application at address 'addr'
gpio    - query and control gpio pins
hdmitx  - HDMITX sub-system
help    - print command description/usage
i2c     - I2C sub-system
icache  - enable or disable instruction cache
imgread - Read the image from internal flash with actual size
irkey   - irkey key_value1 key_value2 key_value3 time_value
itest   - return true/false on integer compare
jtagoff - disable jtag
jtagon  - enable jtag
keyman  - Unify key ops interfaces based dts cfg
keyunify- key unify sub-system
loop    - infinite loop on address range
macreg  - ethernet mac register read/write/dump
md      - memory display
mdc_clk - do mdc clock
mm      - memory modify (auto-incrementing address)
mmc     - MMC sub system
mmcinfo - display MMC info
mw      - memory write (fill)
mwm     - mw mask function
netspd_f- enforce eth speed
nm      - memory modify (constant address)
open_scp_log- print SCP messgage
osd     - osd sub-system
phyreg  - ethernet phy register read/write/dump
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
rarpboot- boot image via network using RARP/TFTP protocol
read_temp- cpu temp-system
reboot  - set reboot mode and reboot system
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
sdc_burn- Burning with amlogic format package in sdmmc
sdc_update- Burning a partition with image file in sdmmc card
set_trim_base- cpu temp-system
set_usb_boot- set usb boot mode
setenv  - set environment variables
showvar - print local hushshell variables
sleep   - delay execution for some time
store   - STORE sub-system
systemoff- system off
temp_triming- cpu temp-system
test    - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
true    - do nothing, successfully
unpackimg- un pack logo image into pictures
update  - Enter v2 usbburning mode
usb     - USB sub-system
usb_burn- Burning with amlogic format package in usb
usb_update- Burning a partition with image file in usb host
usbboot - boot from USB device
version - print monitor, compiler and linker version
vout    - VOUT sub-system
vpu     - vpu sub-system
wipeisb - wipeisb
write_trim- cpu temp-system
write_version- cpu temp-system

[ 本帖最后由 咖啡殉 于 2017-10-20 11:48 编辑 ]
作者: china_ktv    时间: 2017-10-20 12:33

posted by wap, platform: 红米Note3
如果你只是要刷sx05re,并不需要root,只需要tf卡刷好系统,用ttl线,输入reboot update,重启后就自动进入sx05re了,而且你的是905m的,支持没任何问题
作者: 咖啡殉    时间: 2017-10-20 14:26

引用:
原帖由 china_ktv 于 2017-10-20 12:33 发表
posted by wap, platform: 红米Note3
如果你只是要刷sx05re,并不需要root,只需要tf卡刷好系统,用ttl线,输入reboot update,重启后就自动进入sx05re了,而且你的是905m的,支持没任何问题
谢谢!可是我这个盒子并没有reboot update命令
我回去试试【reboot】这个,命令提示是【set reboot mode and reboot system】重启模式和重启系统
作者: china_ktv    时间: 2017-10-20 14:31

posted by wap, platform: 红米Note3
引用:
原帖由 @咖啡殉  于 2017-10-20 14:26 发表
谢谢!可是我这个盒子并没有reboot update命令
我回去试试【reboot】这个,命令提示是【set reboot mode and reboot system】重启模式和重启系统
不可能没有的,这个指令是晶晨盒子升级必备的
作者: 咖啡殉    时间: 2017-10-21 13:02

引用:
原帖由 china_ktv 于 2017-10-20 14:31 发表
posted by wap, platform: 红米Note3
不可能没有的,这个指令是晶晨盒子升级必备的
谢谢楼主,试了下的确有这个命令,现在正在下16G镜像
输入【cat /proc/device-tree/amlogic-dt-id】命令后提示
gxbb_p201_1groot@p201_iptv:/ #
应该没问题吧?
作者: china_ktv    时间: 2017-10-21 14:03

posted by wap, platform: 红米Note3
引用:
原帖由 @咖啡殉  于 2017-10-21 13:02 发表
谢谢楼主,试了下的确有这个命令,现在正在下16G镜像
输入【cat /proc/devicetree/amlogicdtid】命令后提示
gxbb_p201_1groot@p201_iptv:/ #
应该没问题吧?
你这个盒子不用试就知道是支持的,s905m和江苏移动数码视讯q5是一样的soc
作者: QWHHH    时间: 2017-10-22 11:03

悲剧的是我有一个就是这样。。211.。不知道什么时候能支持。。
作者: 咖啡殉    时间: 2017-10-22 15:34

引用:
原帖由 china_ktv 于 2017-10-21 14:03 发表
posted by wap, platform: 红米Note3
你这个盒子不用试就知道是支持的,s905m和江苏移动数码视讯q5是一样的soc
多谢楼主解答,已通过TTL在超级终端里把系统更新了,现在插卡能进sx05re了,但有个问题,如何设置手柄?我插键盘只有方向键能用,其他所有键都没用,你在其他贴子里说的进终端模拟器插手柄,可我这个并不适用啊!
还请楼主帮忙,谢谢!
作者: china_ktv    时间: 2017-10-22 16:05

posted by wap, platform: 红米Note3
引用:
原帖由 @咖啡殉  于 2017-10-22 15:34 发表
多谢楼主解答,已通过TTL在超级终端里把系统更新了,现在插卡能进sx05re了,但有个问题,如何设置手柄?我插键盘只有方向键能用,其他所有键都没用,你在其他贴子里说的进终端模拟器插手柄,可我这个并不适用啊!
还请楼主帮忙,谢谢!
不是进终端,是进retroarch。详细方法看s905m2的q5皮角教程里最后一段
作者: 咖啡殉    时间: 2017-10-22 18:53

引用:
原帖由 china_ktv 于 2017-10-22 16:05 发表
posted by wap, platform: 红米Note3
不是进终端,是进retroarch。详细方法看s905m2的q5皮角教程里最后一段
多谢楼主,重新刷了次,开机会先检测input了,360无线手柄映射成功,可以愉快地玩耍了,虽然我基本不会在盒子上玩游戏,但就是喜欢折腾。
再次感谢!
作者: china_ktv    时间: 2017-10-22 22:58

posted by wap, platform: 红米Note3
引用:
原帖由 @QWHHH  于 2017-10-22 11:03 发表
悲剧的是我有一个就是这样。。211.。不知道什么时候能支持。。
你那个是什么型号什么牌子的盒子?
作者: QWHHH    时间: 2017-10-23 08:54     标题: g大,我的是BESTON 3300L.红盒……

905L的片,闪存是BGA的,删除DTB可以进,但 没声音。g大,我的是BESTON 3300L.红盒……
作者: china_ktv    时间: 2017-10-23 10:54

posted by wap, platform: 红米Note3
引用:
原帖由 @QWHHH  于 2017-10-23 08:54 发表
905L的片,闪存是BGA的,删除DTB可以进,但 没声音。g大,我的是BESTON 3300L.红盒……
本来还想搞一台r3300测试一下的,这下省钱了,感谢提供信息
作者: n2    时间: 2017-10-23 21:56

目前哪个盒子 功能最强皮角最容易?




欢迎光临 TGFC Lifestyle (http://club.tgfcer.com/) Powered by Discuz! 6.0.0