TGFC Lifestyle - Powered by Discuz! Board

引用:

Extra steps for 64-bit users

Since the MotioninJoy drivers are not signed, every time you want to use MotioninJoy on a x64 machine normally you would have to manually disable the driver signature enforcement by constantly pressing the [F8]-key while your system is booting, until the Windows Boot Menu pops up.
There you choose “Disable Driver Signature Enforcement” and press Enter. This is a pain to do especially when you forget to press F8 yet wanted to use the MiJ drivers….

If you are fed up with pressing F8 and disabling Driver Signature Enforcement every time you boot your computer, there is a way to 'sign' the driver yourself using the Driver Signature Enforcement Overrider program. The downside to this is Test Mode must be on, and it will leave a watermark on the bottom-right corner of your desktop saying so.
Click the link above to download Driver Signature Enforcement Overrider, then run it. You may need to turn UAC off for this work. You will need to sign all the files in the “C:\Program Files\MotioninJoy\ds3\drivers\x64” directory, most notably MijXfilt.sys and xusb21.sys. When you reboot your computer, you can now use the MiJ drivers without having to press F8 at every boot.