2年多了吧

We will begin shipping Realiser A16 units this week, and this will continue over the next several months. Since the testing procedure is quite involved we’re only expecting to ship around 10 to 20 units per week. We’ll be posting weekly updates on the numbers that have been shipped, which is intended to give backers some indication of our progress.
The A16 is being shipped with only a single operating mode and with a slightly reduced set of features, outlined below. DTS-X and Auro3D are yet to be certified. If and when these are certified, they will be available in future firmware updates. Other operating modes and features may also be introduced in the future as firmware updates.
Realiser A16 specifications, Firmware v1.0, August 2019

Analogue audio inputs/outputs
1. 16ch input + 16ch output, phono, 2.5Vrms
2. 2ch stereo input, phono, 2.5Vrms
3. 2ch tactile output, phono, 2.5Vrms (DC to 120Hz)

Digital audio inputs/outputs
1. HDMI 2.0b* input (8ch LPCM and bitstream)
2. SPDIF input (coaxial or optical) (2ch LPCM and bitstream)
3. USB 2.0 (16ch, 24bit, 96kHz LPCM) (Drivers for PC and Mac)
* : HDR10+ not supported

Headphone outputs (dual users)
1. Analogue, stereo 1/4” jack and 2ch phono
2. Digital stereo, SPDIF, 24bit @ 48kHz (coaxial and optical)

Ancillary inputs/outputs
1. HDMI 2.0b output (video pass-thru* from any HDMI input)
2. Microphone inputs (dual, for supplied binaural PRIR/HPEQ measurement microphones)
3. Headtracker input (for supplied head-tracker)
4. Set-top input (for supplied set-top IR reference)
5. Micro SD card port (for external PRIR/HPEQ file storage and firmware updates)
* : HDR10+ not supported

Audio bitstream decoding/rendering capability
1. Dolby Atmos (listening modes up to 9.1.6ch)
2. Dolby TrueHD (up to 7.1ch)
3. Dolby Digital (up to 5.1ch)
4. Dolby Digital+ (up to 7.1ch)
5. Dolby Surround upmixing to a 7.1.6ch listening mode

SVS headphone rendering capability
1. Dual users, each user can render 16 virtual loudspeakers in any spatial position
2. Individual headtracking (azimuth only) for both users simultaneously
3. Audio sources : HDMI 1 to 4 (LPCM or bitstream), USB 2.0 (up to 16ch), 16ch analogue, 2ch analogue, SPDIF coaxial or optical (LPCM or bitstream). Audio sources are common to both users.
4. All SVS processing and rendering @ 48kHz sampling rate, 32ms latency, max reverb length 0.75s

AV rendering mode
1. Analogue and digital audio inputs (USB and SPDIF) can be output via the multi-channel analogue line outputs.
2. Decoded Dolby Atmos, Dolby TrueHD, Dolby Digital, and Dolby Digital+ bitstream signals can be output via the multi-channel analogue line outputs.

Binaural room impulse response measurement (PRIR measurement)
1. 16ch synchronous measurement using internally generated excitation signals from the 16ch analogue outputs.

Headphone equalisation (HPEQ measurement)
1. Automatic headphone EQ measurement using binaural microphones
2. Manual headphone EQ using equal loudness noise bands
3. Manual headphone EQ using an external loudspeaker reference


https://smyth-research.com/

16声道耳机虚拟环绕+16声道功放

[ 本帖最后由 Lucifer6E 于 2019-8-14 08:25 编辑 ]

posted by wap, platform: Android
Finally!!!!

posted by wap, platform: Chrome
本周开始发货，每周只发货10~20台。

不知道LZ的要等到多久之后……

posted by wap, platform: iPhone
我只关心大陆用户预购的机子能不能通过国内代理商进来分发，不想被当作高档音频器材被扣税50%

posted by wap, platform: MAC OS X
我估计还得再等一年，233，喷了

posted by wap, platform: Android
楼上的兄弟都订了吗？一起拉个群呀

posted by wap, platform: Android
音频输入只有两声道，混成3600声道也是是白搭

我看更新下面有人回复说收货地址在调查表里填了，我之前都不知道也没填，只好发邮件给他们告知地址，也没回复。

欢迎加群交流哦
861881359
为将来到货后的使用做好技术储备！

posted by wap, platform: iPad
这个线材太多了，我在床上看电影用起来非常不方便，不知有没有什么解决方案。难不成让我沿着墙壁走线到床头柜么。。。

没什么线材啊，线材是如果你想自己采集自己的音箱配置，拿这机器来做功放的时候才需要接的
采集完以后就是HDMI接音源然后耳机线接耳机就行了

posted by wap, platform: Android
究竟有人拿到实机没有

posted by wap, platform: Chrome
这个东西几年了,总算要出来了...

posted by wap, platform: iPhone
给我回信了，说现在还在给Kickstarter发货
要过阵子才会轮到预购的人

Hi,

Sorry about the late reply.

We have been very busy with the shipping of the A16, we also have been continuously working on improving the firmware hence the frequent firmware updates.
At this moment we our shipping out to our Kickstarter backers, once we have completed this we will then start shipping out to all the pre-order customers.
This will be a lengthy process so please be patient. Before shipping out to you we will email you asking for your current shipping address and to confirm your A16 order.

In the mean time you should familiarize yourself with our instruction manual via the website and our You tube channel. Links below.

YouTube: https://www.youtube.com/channel/UC0yePwI_x1q8oACTVHpYxkw/featured

Website: Downloads - SMYTH Research

Talk soon

Regards
James

本帖最后由 加州IT男 于 2020-1-22 20:14 通过手机版编辑

我发邮件过去询问发货时间，还没回信给我。