INTEL集显,60HZ
ATI独显,59HZ
59HZ的刷新率应该就是BUG吧,相反集显并没有这个问题

引用:

原帖由 大忽悠 于 2009-10-23 08:42 发表
[posted by wap, platform: Nokia (E71)]

朋友ati HD4850，俺N 9800gtx+，都是59的问题，pes不能踢太杯具了，网上也搜不到靠谱的解决方法…

所以我主力机还是Vista SP2啊...
Win7,貌似完美解码SPDIF输出5.1都不行...Z5500也没用了,所以只能Vista

引用:

原帖由 jun4rui 于 2009-10-23 08:49 发表
偶的9600GT，也是59……

不过我的WIndows7安装的时候偶还是ATI的，现在也可以选50，59，60.

显示器比兰州多20，kaixin   

HTPC用的显示器渣了点,不过平时都连电视机上啊:D
主力机还行,我还是挺喜欢BENQ的

引用:

原帖由 xtpl 于 2009-10-23 12:35 发表


我用得很正常啊，“音频解码和输出”要选AC3，FFDSHOW是没声音的……

我是选的AC3,但是只有立体声,VISTA就没这个问题...
另外59和60都可以选,无非是选了60后还是会变成59而已

引用:

原帖由 岩田聪 于 2009-10-23 17:32 发表
怎么确定59和60.我的看起来是60的阿.而且也只能选60的.

迪兰公版4850

你的很完美,我的迪兰公版第一批4850,是59HZ

引用:

原帖由 dizhang 于 2009-10-23 17:54 发表

我也是第一批公版买的（就是电容上划蓝色马克笔的那种）,也是59hz，估计和显示器也是有一定关系的。

我记得你的显示器也是1920*1200的?
我这台1920*1080的,就是60HZ,难道和这个有关么,WIN7有鄙视16:10显示器的嫌疑?

引用:

原帖由 dizhang 于 2009-10-23 18:13 发表

我试过给我的显示器安过xp的驱动，安装上去了无报错，但是59hz问题依旧……也从没见过windows update里面有显示器补丁的……哎～

显示器补丁确实是有的,但是打补丁没有什么用...1080P的显示器不打补丁也是60HZ

引用:

原帖由 singlung 于 2009-10-23 18:26 发表

我用Potplayer内置的DTS解码能SPDIF输出5.1

这个POTPLAYER是可以SPDIF输出5.1的,不过我还是习惯完美解码啊

引用:

原帖由 大口仔 于 2009-10-23 19:31 发表
不用搞了 我的蓝宝石4850 1g也是锁定59, 看来要换个n卡了

2L不就是N卡的9800...同样59HZ

引用:

原帖由 singlung 于 2009-10-23 19:51 发表

完美解码已内置POTPLAYER呀

呃,我知道,但是我习惯用完美的MPC
KMP和POT都不怎么习惯

看来WIN7真的有16:10显示器的BUG

悲剧了,也不是什么16:10的问题,完完全全就是显示器的问题,59.94HZ和60HZ的区别
非WIN7的BUG,也并非是显卡驱动的BUG...问题就在于部分显示器是59.94HZ的,XP和VISTA用四舍五入的方式成了60HZ

引用:

The 59hz itself is not actually a bug and It will not be fixed by display drivers, so stop asking.

Many of you, are of the thought that, the base refresh rate of most monitors is 60hz, However, the true frequency for most monitors is 59.94hz. Some monitors are infact true 60hz, but these are only certain models/brands.

Windows XP and Vista, both round the Refresh rate display up from 59.94, to the nearest whole number, which is 60, the same way the Config UI on a monitor, would also say 60.

Windows 7 was changed to further conform to the EDID standard, and as such many monitors will only run at 59hz (59.94 actual). The reason for this is windows no longer rounds the number to the nearest whole, though most monitors still will. (Check yourself if you like).

Many of you are having a problem with getting 60hz to stick. This is because the DDC/CI information provided from the display is telling the system that the max refresh rate is 59.94, as such only 59hz is exposed as a supported mode.

Nothing here has actually changed. Most displays have always run at between 58 and 60hz, but have just displayed the running mode as 60hz due to the rounding up.

However, some games are hard coded to only support a 60hz refresh rate. This is neither nvidia's or microsofts fault, it is a fault with the game developer for being the geniuses they are, and hard coding refresh support.

[ 本帖最后由 深蓝LWL1123 于 2009-10-26 10:49 编辑 ]

引用:

原帖由 dizhang 于 2009-10-26 13:12 发表

我试了下，pes2010和x-men wolf的那个就算控制面板强制垂直同步也无效，应该就是这59hz的毛病，其他大部分游戏开垂直同步没问题。

关键就是PES2010...这个不能垂直同步,直接就是悲剧