关卡设计赞~~~~但同烂泥~~~到后面那些细的地方几乎没法玩.........Wii的游戏按照那种难度设计的话LuNU全部跑个精光的程度............

引用:

原帖由 emuwave 于 2007-4-13 09:06 PM 发表
俺刚在tb上buy了一个，溅价 ，终于圆了俺多年的梦，
在俺的gba上是渣，因为屏幕反光超垃圾，gbasp上要进行上下颠倒设置，游戏玩法很强，靠倾斜卡带来控制，只是难度高了点，特别是跳跃的时候，摔死 ...

我查过很多相关的资料，都没有找到这个游戏的反转设定，能否告之？
似乎只有找到类似《滚滚解谜鼠》的反转指令

原来总觉得不容易控制，后来接上了震动握柄，效果100%满意
同时震动感也很好。开机画面的意思是让你把机器放平，确定后进入游戏！

图片来了！

http://www.gamespot.com/gbc/puzz ... 20Tilt%20n%20Tumble

Kirby's Tilt 'n' Tumble UnlockablesUnlockables
Unlockable  How to Unlock  
Free Mini-Game Access  Complete the game once  
Extra Courses  Collect all 32 Red Stars  
Hard Mode  Get all Red Stars  
Special Mode  Collect all red stars in both normal, and hard mode.  

Kirby's Tilt 'n' Tumble Easter EggsFun with the Title Screen
On the Title Screen, wait a couple of seconds. Small multi colored stars and moons will then appear on the screen. Tilt the game boy left to move the stars and moons left, right to move them right, up to move them up, and down to move them down.
Kirby's Tilt 'n' Tumble SecretsWarp from 3-1 to 6-1
In 3-1 you have to go northeast from where you started to warp. To do this, jump the first bridge and get to the end. Go across the water to your right, and you will find a tree. He asks you if you want to warp to 6-1 from there.

唉。GBC被人弄丢了啊。这个能在GBASP上玩么？真想收一个。

语误啊版主
反转是指操作方向，不是游戏的画面：P
因为在gbasp上卡带的指向反了，要进行反转指令
to ls，gbasp肯定能玩，老任官方也介绍过的。
现在发现开机时一定要把机器放平，不然无法正常校正

引用:

原帖由 emuwave 于 2007-4-15 19:13 发表
语误啊版主
反转是指操作方向，不是游戏的画面：P
因为在gbasp上卡带的指向反了，要进行反转指令
to ls，gbasp肯定能玩，老任官方也介绍过的。
现在发现开机时一定要把机器放平，不然无法正常校正

烂泥说的就是操作方向~~~

请教详细做法~~~在下记得SP是不能使用的~~~ls不会是和GBA某个同样有感应的游戏弄混了吧

SP可以玩:D

引用:

原帖由 无风无雨 于 2007-4-15 19:44 发表
SP可以玩:D

插金手指转接么........

Kirby Tilt n Tumble and GBA-SP

--------------------------------------------------------------------------------

I've decided to see what it would take to make this oddball GBC game work correctly with the new SP. The tilt sensor is in the chip on the very top of the cart, just a bit to the left (you should be able to see it easily) It is a ADXL202 X-axis and Y-axis tilt meter (basically pitch and roll sensor). I have bad news and good news...


Bad news: since there's only 2 output (X axis and Y axis) it's not going to be easy to flip it.

Good news: you can desolder the whole chip, rotate it 180 degrees and then wire the chip pins to the original pad. Since it's rotated 180 degree, it'll work with the SP. But it will no longer work with with GBA or GBC.

Alternatively someone could get the ROM of the game, hack in to add a menu at startup to ask if the player is using SP or GBA/GBC and if it's SP, flip the control and then play as normal. But you'd need an EPROM burner and the resulting modified game cart would have ugly black chip sticking out and it'd be a bitch to make the cart fir back in the GBC.

Another thing, for using the game with GBA Player for the GC, just take the whole GC and put it in your hand with the cart slot pointing away from you. Tilt and roll the whole 'cube to control Kirby.
link在这里，疯狂的老外使用的方法是硬改，先把整个芯片吹起然后翻转180度重贴，无敌！

但我记忆中应该是老任官方支持旋转的，我再找找

[ 本帖最后由 emuwave 于 2007-4-16 22:04 编辑 ]

滚滚鼠 是有官方反转指令的

但是 卡比就是找不到

tb上面搜索不到卖这个的

貌似滚滚卡比真的在gbasp上运行不了，老任教的方法只针对gba上的滚滚方块游戏
link在“特定のコマンド”
http://www.nintendo.co.jp/n08/hardware/gbasp/index.html
我发现在gba上通过设置不同的起始角度可以有不同的效果，甚至把gba倒过来也可以，不知道这样在sp上有什么效果？据说sp的屏幕显示和gba的是倒转的。
历史太悠久了，记忆开始模糊

连老赵也引进来了 ，but 请看帖再回帖，tb地址我都贴出来了

:D :D